Installing The Vp-200Vx Power Amplifier Input Module In The Power Amplifiers - Toa FV-200 Series Instruction Manual

6.3. Installing the VP-200VX Power Amplifier Input Module in the Power Amplifiers

Step 1. Remove the top panel.
Step 2. Using nippers, clip out 4 connecting sections and the plate over the VP-200VX mounting location on
the power amplifier's rear panel.
FV-224PA-AS Rear
Z-FV224PA-AS
Step 3. Unscrew the VP-200VX's panel.
Step 4. Mount the VP-200VX module.
Attach the VP-200VX 's panel to the mounting location and the VP-200VX unit to the back of the
mounting location, then secure them to the amplifier using the screws removed in Step. 3.
Notes
[Isometric view of FV-224PA-AS]
Mounting screw
(Use the screw removed
from the VP-200VX)
Step 5. Plug the VP-200VX's connector into the connector on the circuit board inside the amplifier.
Step 6. After mounting is completed for all required channels, replace the top panel.
VP-200VX
VP-200VX panels
Cut off with nippers
27