Connecting The External Equipment Between The Pre-Amplifier Output And The Power Amplifier - Toa 800D Series Operating Instructions Manual

9.7. Connecting the External Equipment between the Pre-amplifier Output and the Power
Amplifier
Appropriate sound can be obtained by connecting a signal processor like an equalizer or limiter between the
unit's preamplifier section (Pre-amplifier output jack) and the power amplifier section (Power amplifier input
jack).
Note
Inserting a pin plug into the unit's power amplifier input jack disconnects the preamplifier section from the power
amplifier section inside the unit.
IN
Signal processor
OUT
A-812D/824D/848D
Pre-amplifier output specifications: 0 dB*, 600 Ω, unbalanced
Power amplifier input specifications: 0 dB*, 600 Ω, unbalanced
* 0 dB = 1 V
17