Installation For Using The Stand Base; Attaching The Stand Base - NEC E657Q User Manual

Installation for using the Stand Base

IMPORTANT: Do not apply pressure to the screen display area which may
compromise the integrity of the display. The manufacturer's warranty does not
cover user abuse or improper installations.

Attaching the Stand Base

E657Q
E557Q / E507Q / E437Q / E327
1. Place the display face down on a soft and flat surface to prevent
scratching and damage.
2. Carefully align the stand base to the button of the display and fasten the
screws with a cross-head screwdriver.
CAUTION:
The stand base is very heavy. Install with care to avoid injury such as dropping the
stand base onto one's foot.
English-13
Stand Screw x 4
M6 (25mm)
Stand Screw x 4
M4 (20mm)