Download  Print this page

NEC E657Q User Manual

Digital signage display.
Hide thumbs

Advertisement

Digital Signage Display
User's Manual
E657Q
E557Q
E507Q
E437Q
E327
Please find your model name in the label on the backside of display.
Rev. 2.0

Advertisement

Table of Contents

   Related Manuals for NEC E657Q

No related manuals

   Summary of Contents for NEC E657Q

  • Page 1 Digital Signage Display User’s Manual E657Q E557Q E507Q E437Q E327 Please find your model name in the label on the backside of display. Rev. 2.0...
  • Page 2: Table Of Contents

    Mobile Telephone Warning ..............English-41 End Of Life Directives ................English-41 Italian Homologation declaration ............English-41 Manufacturer’s Recycling and Energy Information ......... English-42 Disposing of your old NEC product ............English-42 Energy Saving ..................English-42 WEEE Mark (European Directive 2012/19/EU) ........English-43 Specification..................... English-44 Product Specifications ................English-44 Controlling the Display via RS-232C Remote Control ........
  • Page 3: Precautions And Reminders

    Precautions And Reminders Do not place the display Do not open the display Call a NEC certified in confined spaces or in a cabinet. service personnel for any box when in use. Maintain internal service needed for ample ventilation for the your display.
  • Page 4: Important Safety Instructions

    Important Safety Instructions Read before operating equipment Follow all warnings and instructions marked on this display. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6.
  • Page 5 16. If display or glass is broken, do not come in contact with the liquid crystal and handle with care. 17. Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer. 18. Rest your eyes periodically by focusing on an object at least 5 feet away.
  • Page 6 WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. English-4...
  • Page 7: Important Information

    Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
  • Page 8 If the display does not operate properly, unplug the display and call your authorized dealer or service center. Adjust only those controls that are covered in the instructions, as improper changes or modifications not expressly approved by NEC could void the user’s warranty. Batteries installed warning Incorrect usage of batteries can result in leaks or bursting.
  • Page 9 CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. English-7...
  • Page 10: License Notice And Trademark Acknowledgement

    License Notice and Trademark Acknowledgement Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. All other brands and product names are trademarks or registered trademarks of their respective owners. The terms HDMI and HDMI High- Definition Multimedia Interface, and ®...
  • Page 11: Supplier's Declaration Of Conformity

    (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: NEC Display Solutions of America, Inc. Address: 3250 Lacey Rd, Ste 500 Downers Grove, IL 60515 Tel.
  • Page 12 America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. Use the attached specified cables with the E657Q / E557Q / E507Q / E437Q / E327 color monitor so as not to interfere with radio and television reception.
  • Page 13 FCC CAUTION To assure continued compliance and possible undesirable interference, ferrite cores may be used when connecting this Display to video equipment; and maintain at least 400mm spacing to other peripheral device. Cables Connections to this device must be made with shielded cables with metallic RF / EMI connector hoods to maintain compliance with FCC Rules and Regulations.
  • Page 14: Contents

    • HDMI Cable • Remote Control • 1.5V AAA Size Batteries x2 • Setup Manual x1 E657Q / E557Q / E507Q / E437Q / E327 (EU) HDMI Cable Power Cord* Setup Manual Wireless Remote Control Setup Manual and AAA Batteries...
  • Page 15: Installation For Using The Stand Base

    IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. Attaching the Stand Base E657Q Stand Screw x 4 M6 (25mm) E557Q / E507Q / E437Q / E327...
  • Page 16: Ventilation

    Leave at least this space around the set. 4 inches (E327 / E437Q / E507Q / E557Q) 5.9 inches (E657Q) 10 cm (E327 / E437Q / E507Q / E557Q) 15 cm (E657Q) Never install the display set where air-circulation is blocked.
  • Page 17: Prevent Tipping

    When using the display with the optional table top stand, fasten the monitor to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. E657Q 400 mm Screw Holes...
  • Page 18 CAUTION: Be sure to remove the cord or chain from the wall before moving the monitor. Objects and ventilation holes Never push objects of any kind into the display through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or an electric shock.
  • Page 19: Installation For Wall Mouting (optional)

    DO NOT block ventilated openings with mounting accessories or other accessories. For NEC Qualified Personnel: Stability Hazard. The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the floor/wall in accordance with the installation instructions.
  • Page 20: Removing The Stand Base

    4 x M4 (16 mm) NOTE: Wall mounting solution is not included with the unit and is sold separately. Contact your NEC representative for details. It is necessary to provide screw of appropriate length (Wall mount bracket thickness + VESA hole depth).
  • Page 21: Ventilation

    Ventilation The slots and openings in the display are provided for necessary ventilation. To ensure reliable operation of the display and to protect it from overheating, these slots and openings must never be blocked or covered. Unless proper ventilation is provided, the display may gather dust and get dirty.
  • Page 22: Prohibit Portrait Condition Use

    For use only with UL Listed Wall Mount Bracket with minimum weight/load: Please refer to the page of Specification. Unit without base weight: The equipment and its associated mounting means still remain secure during the test. Used wall mounting kit, VESA-compatible wall bracket distance, diameter of Screw dimension: Please refer to the page of Specification.
  • Page 23: Preparation

    Preparation Place The Display On A Solid Surface Ensure that the display is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. Do not place the display near any open flames. Do not allow the display to be placed in an environment where it can be exposed to heat, direct sunlight, or rain and...
  • Page 24: Connect To The Power Source

    Cable Information: CAUTION: Use the attached specified cables with the E657Q / E557Q / E507Q / E437Q / E327 color monitor so as not to interfere with radio and television reception. Use of other cables and adapters may cause interference with radio and television reception.
  • Page 25: Power On/off Your New Display

    Power On/Off Your New Display Press the power button on the remote control or press the power button located on the side of the display. The display will power on. Power button Power Mode Status When in ON mode, the display operates as follows if no external signal is input.
  • Page 26: Energy Options

    Energy Options The three following modes are available on the Monitor. LAN and RS-232C can be selected for the Monitor control. The operation of the energy options mode varies depending on the control selection. When RS-232C is selected for control Home mode / Office mode - When there is no signal, NO SIGNAL is displayed and the Monitor switches to Auto Standby mode after a fixed period of time has passed.
  • Page 27 CAUTION: • If the power cord if disconnected in Auto Power save mode or Auto Standby mode, the Monitor will be in Auto Standby mode the next time the power cord is connected. • When the energy options mode is switched to Home, Retail or Office, the Video Menu settings return to their default values.
  • Page 28: Source Connection Guide

    Source Connection Guide E657Q AC POWER ❶ ❷ ❸ ❾ ❽ ❼ ❻ ❺ ❹ VGA – Connect to your PC video. 2. USB1 port – Used for accessing photo, music, and movie files. Please make sure the connector shape and orientation is correctly aligned when connecting the USB device or cable.
  • Page 29 RS-232C – Connect to your PC, and receive the control commands from the PC. 8. LAN port (RJ-45) – LAN connection. USB2 port – Power supply port 5V/2A (maximum) Please make sure the connector shape and orientation is correctly aligned when connecting the USB device or cable. When you use the USB (2A) port for power supply, please use a USB cable that supports Do not bind the USB cable.
  • Page 30 5. AUDIO IN – Connect to your PC audio. 6. COMPONENT / AV IN – • Component: Connect to digital video equipment to the Video Green (Y), Blue (Pb), Red (Pr) jacks, and matching Audio White (L) and Red (R) jacks.
  • Page 31: Using The Remote Control

    Using The Remote Control (Power) Press to turn On/Off (standby) the power. (NOTE: To completely turn off the power, unplug the power cord from the power outlet.) No function. Press to choose Composite source mode. COMP PRE CH Press to choose Component source mode.
  • Page 32: Operating Range For The Remote Control

    Picture Audio Press to choose the picture mode: Press to choose sound mode: Dynamic / Standard / Energy Savings Standard / Movie / Music / News / / Theater / Game / Custom / HDR Custom Video or HDR Dynamic (Except for CH-List E327) No function.
  • Page 33: Timing Table

    Timing Table HDMI Video Refresh rate Resolution Component (Hz) E327 E437Q E507Q E557Q E657Q 640 x 480p ● 720 x 480i ● ● 720 x 480p ● ● 720 x 576i ● ● 720 x 576p ● ● 1280 x 720p ●...
  • Page 34: Navigating The On-screen Menu

    Dynamic / Standard / Energy On / Off Savings / Theater / Game / [MEMC] (Only for E557Q / Custom E657Q) HDR Video (Dynamic) Select smooth levels of fast (Except for E327) motion scenes. (depends on input content Off / Smooth / Ultra Smooth / format).
  • Page 35: Audio Menu

    Brightness 3. Bass Adjust picture brightness from Enhance the low frequencies. 0 ─ 100. 0 ─ 100 5. Contrast Treble Adjust picture contrast from Enhance the high frequencies. 0 ─ 100 0 ─ 100. 6. Color 5. Internal Speakers Adjust picture color from Set the audio output to the 0 ─...
  • Page 36: Setup Menu

    Setup Menu [Enable CEC] Select On to enable HDMI CEC. According to various requirements in different source modes, certain [Audio Receiver] features could be hidden (disabled) Select On to enable ARC (Audio on the menu. Return Channel) function. ARC is an audio link which can HDMI 1 replace other cables between the Monitor and the receiver...
  • Page 37 Retail mode [Auto Adjust] When there is no signal, NO Automatically adjust the image SIGNAL is displayed but the settings such as position. Monitor does not switch to [H. Position] an energy options mode (it Adjust horizontal position. remains in ON mode). [V.
  • Page 38: Control Settings Menu

    Control Settings Menu Standard Display regular quality HDMI format such as 4K 30Hz HDMI 1 or FHD HDMI contents from source devices with HDCP 1.4. Control Settings Professional Display high Control Interface RS-232C quality HDMI format such as 4K Network Settings Monitor ID 60Hz and HDR contents from source devices with HDCP 2.2.
  • Page 39: Usb Demo Mode

    [MAC ADDRESS] Displays the Play files in USB Demo Mode MAC ADDRESS for the monitor During demo mode: connected to the network. • The Power, Volume and Mute You cannot change it. buttons on remote control are [SAVE] Save the settings. functional.
  • Page 40: Navigating The Usb (media Player) Menu

    Navigating The USB (Media player) Menu USB Menu Operation Buttons You can browse image, music, or • Press the Menu button while video files stored in the USB storage playing a file to display the device. operation menu on the screen. •...
  • Page 41 • Select to play fast backward. Repeat FF2X, FF4X, FF8X, FF16X, • All the files in the same folder are FF32X played repeatedly. (The sound is not output.) • If you check and play several • Select or press the button files, these files are played Previous...
  • Page 42 • While a file is being played, select Data Format for USB or press the Display button to Info FAT16/32, NTFS Supported file show information on the file being system played. Max. folder layer • Select or press the Wide Wide button to choose the display PHOTO mode...
  • Page 43: Maintenance And Recycling

    Maintenance and Recycling Care Of The Screen Do not rub or strike the screen with anything hard as this may scratch, mar, or even damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the display by wiping the screen and the cabinet with a soft, clean cloth.
  • Page 44: Manufacturer's Recycling And Energy Information

    Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
  • Page 45: Weee Mark (european Directive 2012/19/eu)

    WEEE Mark (European Directive 2012/19/EU) Disposing of your used product: In the European Union EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.
  • Page 46: Specification

    Specification Product Specifications E657Q LCD Module: 65”/ 1639.0 mm diagonal Resolution: 3,840 x 2,160 Color: Over 1.07 billion colors (depending on video card used) Brightness: 350cd/m2 (Typ.) @ 25°C Frequency Horizontal: 31 – 83KHz (Analog input) 15.625/15.734KHz, 31 – 136KHz (Digital input)
  • Page 47 Luminance Ratio Mercury Content 0.0 mg Presence of Lead Yes-This display contains lead only in certain parts or components where no technology alternatives exist in accordance with existing exemption clauses under the RoHS Directive Operational Temperature: 0°C – 40°C / 32°F – 104°F Environment Humidity: 10% –...
  • Page 48 E557Q LCD Module: 55”/ 1387.8 mm diagonal Resolution: 3,840 x 2,160 Color: Over 1.07 billion colors (depending on video card used) Brightness: 350cd/m2 (Typ.) @ 25°C Frequency Horizontal: 31 – 83KHz (Analog input) 15.625/15.734KHz, 31 – 136KHz (Digital input) Vertical: 56Hz, 60Hz, 70Hz, 75Hz (Analog input) 24Hz, 30Hz, 50Hz, 60Hz, 70Hz, 75Hz (Digital input)
  • Page 49 Presence of Lead Yes-This display contains lead only in certain parts or components where no technology alternatives exist in accordance with existing exemption clauses under the RoHS Directive Operational Temperature: 0°C – 40°C / 32°F – 104°F Environment Humidity: 10% – 80% Altitude: 0 –...
  • Page 50 E507Q LCD Module: 50”/ 1257.3 mm diagonal Resolution: 3,840 x 2,160 Color: Over 1.07 billion colors (depending on video card used) Brightness: 350cd/m2 (Typ.) @ 25°C Frequency Horizontal: 31 – 83KHz (Analog input) 15.625/15.734KHz, 31 – 136KHz (Digital input) Vertical: 56Hz, 60Hz, 70Hz, 75Hz (Analog input) 24Hz, 30Hz, 50Hz, 60Hz, 70Hz, 75Hz (Digital input)
  • Page 51 Presence of Lead Yes-This display contains lead only in certain parts or components where no technology alternatives exist in accordance with existing exemption clauses under the RoHS Directive Operational Temperature: 0°C – 40°C / 32°F – 104°F Environment Humidity: 10% – 80% Altitude: 0 –...
  • Page 52 E437Q LCD Module: 43”/ 1079.9 mm diagonal Resolution: 3,840 x 2,160 Color: Over 1.07 billion colors (depending on video card used) Brightness: 350cd/m2 (Typ.) @ 25°C Frequency Horizontal: 31 – 83KHz (Analog input) 15.625/15.734KHz, 31 – 136KHz (Digital input) Vertical: 56Hz, 60Hz, 70Hz, 75Hz (Analog input) 24Hz, 30Hz, 50Hz, 60Hz, 70Hz, 75Hz (Digital input)
  • Page 53 Presence of Lead Yes-This display contains lead only in certain parts or components where no technology alternatives exist in accordance with existing exemption clauses under the RoHS Directive Operational Temperature: 0°C – 40°C / 32°F – 104°F Environment Humidity: 10% – 80% Altitude: 0 –...
  • Page 54 E327 LCD Module: 32”/ 801.3 mm diagonal Resolution: 1,920 x 1,080 Color: Over 16 million colors (depending on video card used) Brightness: 350cd/m2 (Typ.) @ 25°C Frequency Horizontal: 31 – 83KHz (Analog input) 15.625/15.734KHz, 31 – 83KHz (Digital input) Vertical: 56Hz, 60Hz, 70Hz, 75Hz (Analog input) 24Hz, 30Hz, 50Hz, 60Hz, 70Hz, 75Hz (Digital input)
  • Page 55 Presence of Lead Yes-This display contains lead only in certain parts or components where no technology alternatives exist in accordance with existing exemption clauses under the RoHS Directive Operational Temperature: 0°C – 40°C / 32°F – 104°F Environment Humidity: 10% – 80% Altitude: 0 –...
  • Page 56: Controlling The Display Via Rs-232c Remote Control

    Controlling the Display via RS-232C Remote Control This Display can be controlled by connecting a personal computer with an RS-232C (reverse type) terminal. Connection Display + computer. • Please turn off the monitor’s main power when connecting a computer to the monitor.
  • Page 57 Stop bit 1 bit Communication code ASCII This Display uses RXD, TXD and GND lines for RS-232C control. The reverse type cable (null modem cable) (not included) should be used for RS-232C control. 2) PIN ASSIGNMENT RS-232C input/output Pin No RS-232C D-Sub 9-pin (Monitor side) This Display uses RXD, TXD and GND lines for RS-232C control.
  • Page 58: Controlling The Display Via Lan Control

    Controlling the Display via LAN Control Connecting to a Network Using a LAN cable allows you to specify the Network Settings by using an HTTP server function. To use a LAN connection you are required to assign an IP address. Example of LAN connection: Server LAN cable...
  • Page 59 Example 1: When the host name of the monitor has been set to “pd.nec. co.jp”, access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for the address or the entry column...
  • Page 60 Operation Access the following address to show HOME. http://<the Monitor’s IP address>/index.html Click each link on the left column below HOME. NOTE: Function of buttons which are shown on setting pages. [APPLY]: Save your settings. [CANCEL]: Return to the previous settings. NOTE: CANCEL is disabled after clicking APPLY.
  • Page 61 DNS PRIMARY Enter the primary DNS server settings of the network connected with the monitor. NOTE: Enter [0.0.0.0] to delete the setting. DNS SECONDARY Enter the secondary DNS server settings of the network connected with the monitor. NOTE: Enter [0.0.0.0] to delete the setting. AMX Settings Click on “AMX”...
  • Page 62 Name Settings Click on “NAME” on the left column below HOME. HOST NAME Type in the hostname of the monitor which is connected to the network. Up to 15 alphanumeric characters can be used. DOMAIN NAME Type in the domain name of the network which is connected with the monitor.
  • Page 63: Supporting Hdmi Cec Command

    Supporting HDMI CEC command HDMI CEC Explanation command name If HDMI CEC supporting devices are turned on, the display connected to the devices by HDMI cable is also turned on automatically. One Touch Play After that, the input switches to HDMI from an input, which you selected.
  • Page 64: Before Calling Service

    • Adjust the contrast, color and brightness settings. color • Change setting of MEMC at OSD (Only for E557Q / Poor picture E657Q). • This may be caused by electrical interference (e.g. hair- dryer, nearby neon lights, etc.). Presence of a horizontal dotted line •...
  • Page 65: Glossary

    Glossary HDMI Inputs High-Definition Multimedia Interface Audio / Video Inputs are located on the receiver. These connectors are used for the input of audio and video signals. Designed to receive higher picture resolution and offer sound connection options. Menu An on-screen listing of features shown on the display screen is made available for user adjustments.
  • Page 66: [notice] About The Mpeg-4 Avc, Mpeg-4 Visual License Included In This Product

    [Notice] About the MPEG-4 AVC, MPEG-4 Visual license included in this product 1. MPEG-4 AVC THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/ OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A...
  • Page 67 GPL/LGPL Software Licenses Used by the Product Thank you for purchasing an NEC product. 1. GPL/LGPL software The product includes software licensed under GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). We disclose the software’s source codes so that you may get, copy, distribute and modify it licensed under GPL or LGPL.
  • Page 68 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
  • Page 69 TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program”...
  • Page 70 of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you;...
  • Page 71 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
  • Page 72 Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation.
  • Page 73 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;...
  • Page 74 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright © 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works.
  • Page 75 Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.
  • Page 76 The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form.
  • Page 77 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code;...
  • Page 78 * b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange,...
  • Page 79 The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed.
  • Page 80 All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term.
  • Page 81 An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party’s predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.
  • Page 82 A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to...
  • Page 83 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 84 Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: <program> Copyright (C) <year> <name of author> This program comes with ABSOLUTELY NO WARRANTY;...
  • Page 85 GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
  • Page 86 Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.
  • Page 87 “Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
  • Page 88 In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
  • Page 89 6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer`s own use and reverse engineering for debugging such modifications.
  • Page 90 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the...
  • Page 91 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices.
  • Page 92 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY...
  • Page 93 fontconfig/COPYING Copyright © 2000,2001,2002,2003,2004,2006,2007 Keith Packard Copyright © 2005 Patrick Lam Copyright © 2009 Roozbeh Pournader Copyright © 2008,2009 Red Hat, Inc. Copyright © 2008 Danilo Šegan Copyright © 2012 Google, Inc. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of the author(s) not be used in...
  • Page 94 ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1995-2009 International Business Machines Corporation and others All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this...
  • Page 95 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
  • Page 96 libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs...
  • Page 97 Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.net December 9, 2010 OpenSSL License Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 98 Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to.
  • Page 99 zlib License This software is provided `as-is`, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1.

This manual is also suitable for:

E507qE557qE437qE327

Comments to this Manuals

Symbols: 0
Latest comments: