Step
and unsolder the welding joint between
the gas valve and the air-return pipe to
remove the gas valve. (NOTE: Discharge
b
the refrigerant completely before
unsoldering; when unsoldering, wrap the
gas valve with a wet cloth completely to
avoid damage to the valve caused by high
temperature).
valve and unsolder the welding joint
connecting the liquid valve to the Y-type
pipe to remove the liquid valve.
c
Unsolder pipes connecting with
compressor.
d
Remove the 3 foot nuts on the compressor
and then remove the compressor.
84
Procedure
4-way valve
compressor
Service Manual
nuts
Installation and Maintenance