When Forgot The Password - D-Link DMC-1002 Manual

Trap Community Name: to authorize the device trap community
name
Trap Host IP Address: to set the trap host IP address (same as
monitoring station IP address).
Cold Start trap:
enable).
Authentication Fail Trap: to set the warning trap when the
community name of the device and workstation are
different
Power Fail Trap: to set the Power Fail Trap
Fan Fail Trap:
MC Plug-in Trap: to set the trap of the Media Converter module
if it is plugged in
MC Pullout Trap: to set the trap of the Media Converter module
if it is pulled out
Appendix A

When forgot the password

Boot up the chassis system and press the escape button repetitious three to
four times, then press "root" for login the BIOS setting, some command key
as follow: help, ls(list), sysconf (system configuration), flash, boot
Help: to check the usage of the command list.
Ls: to list out the command key.
Sysconf: to configure or view the system parameter to IIC EEPROM.
Flash: to flash the image file from TFTP server.
Boot: to boot up the system.
The usage will indicate out on the screen when the command key input error.
(default = public).
to set the trap for rebooting the device
(default = enable)
to set the fan fail trap
(default = enable).
(default = enable).
.
(default = enable).
20
(default = enable).
(default =