Table of Contents
Advertisement
Cold Start trap:
(default = enable).
Authentication Fail Trap: to set the warning trap when the
community name of the device and workstation are
different
Power Fail Trap: to set the Power Fail Trap
Fan Fail Trap:
MC Plug-in Trap: to set the trap of the Media Converter module
if it is plugged in
MC Pullout Trap: to set the trap of the Media Converter module
if it is pulled out
MC Broken Trap: to set the trap when the Media Converter
module was broken
MC Link up Trap: to set the trap when a linking is connected
(default = enable).
MC Link down Trap: to set the trap when a linking is
disconnected
MC Active Slot Xchg Trap: to set the trap when there is a
redundant function activated
MC Active Slot Lose Trap: to set the trap when the redundant
function is fail
to set the trap for rebooting the device
(default = enable)
to set the fan fail trap
(default = enable)
(default = enable).
(default = enable).
(default = enable).
(default = enable).
.
(default = enable)
.
(default = enable).
12
(default = enable).
.
Advertisement
Table of Contents
