Siemens SIMATIC Operating Manual page 4

Preface
Style conventions
Style convention
"OK"
"File > Edit"
<F1>, <Alt+P>
Figures
This document contains figures of the software described. The figures can deviate slightly
from the supplied software.
Trademarks
The following designations marked with the symbol ® are registered trademarks of
Siemens AG:
● SIMATIC
● WinCC
History
The following earlier release versions of these operating instructions have been published:
Edition
04/2016
01/2017
10/2017
4
Scope
User interface terms, for example, dialog names, tabs, buttons,
•
menu commands
Required inputs, for example, limits, tag values.
•
Path information
•
Operator actions, for example, menu commands, shortcut menu commands.
Keyboard operation
; SIMATIC HMI ; SIMATIC Industrial Flat Panel
® ®
®
Comment
First edition V1.1
V1.2: Expansion by Touch/Key devices with resistive single touch screen,
"Information" tab, IFP ETH commissioning, amendments
Remedy
; SIMATIC IPC
® ®
PDT IFP Monitor Standard
Operating Manual, 10/2017, A5E41104536-AB