Siemens SIMATIC Operating Manual page 10

Panel Drivers and Tools software
1.3 Setup
PPI settings for new users
Note
Size of the operator controls
The operator controls of Windows applications have a different size depending on the
different screen sizes. By adjusting the PPI resolution you set the operator controls to an
operable size. Only for the standard user, however, and not for other users.
• To set the PPI resolution for a different user, log on as new user with your own Account
and click "Start > Siemens Automation" in the Windows Start menu.
"Set SIMATIC IPC Windows PPI Settings".
Restart the computer to apply the values for the desktop.
• Uninstall: To remove the adjusted PPI resolution for the desktop, click "Set default
Windows PPI Settings" in the Windows Start menu "Start > Siemens Automation".
Restart the computer to apply the values for the desktop.
Support information
The link "IPC_Service&Support" on the desktop provides a brief summary of the PC
hardware information.
This HTML page is created at the time of installation and can be called later in the browser.
10
PDT IFP Monitor Standard
Operating Manual, 10/2017, A5E41104536-AB