Customer Responsibilities; Lan Communications - NCR P1535 POS (7761) Site Preparation Manual

Site Preparation

Customer Responsibilities

Before installing the system, the customer must perform or provide the following:
• When required by NCR, provide the NCR Customer Services representative with
• Make building alterations necessary to meet wiring and other site requirements
• Provide and install all communications cables, wall jacks, special connectors, and
• Provide and install necessary power distribution boxes, conduits, grounds, lightning
• Ensure all applicable codes, regulations, and laws (including, but not limited to,
• Provide and install auxiliary power or other equipment as required
• Provide storage or service areas as required
• Meet all system or unit environmental requirements
• Provide and install floor coverings and environment systems that limit or control
In general, keep the NCR equipment area free from dust, smoke, lint, and other
particles. Avoid locating the equipment near other machines that generate ink, carbon,
and paper dust particles.

LAN Communications

The NCR P1535 Terminal supports Ethernet 10/100/1000baseT Local Area Network
(LAN) communication protocol. For Ethernet communications wiring specifications,
refer to the
appropriate drawings that indicate:
• Equipment location
• Site wiring (power and communications, paths and lengths)
• Location of other equipment that may generate electrical noise, electromagnetic
interference, or heat
associated hardware
protection devices, and associated hardware
electrical, building, safety, and health) are met
static electricity build-up and discharge
NCR Ethernet Communication Wiring Guide (BST0-2118-82).
1-3