Catalyser 2300-0001 ENGLISH 1. Introduction 3. Hazard Information We are pleased with your decision to purchase the Catalyser. 3.1 Symbology Please read the following operating in- The following symbols are employed in these instruc- structions carefully and observe the safety tions and on the unit itself: information they contain in order to ensure Danger...
3.3 Liability Exclusion There are no operating or control elements on the Catalyser itself. Renfert GmbH shall be absolved from all claims for damages or warranty if: • The product is employed for any purposes 6. Maintenance other than those cited in the operating instructions;...
8. Warranty 10. Technical Specifications Provided the unit is properly used, Renfert warrants Mains voltage: 230 V. 50/60 Hz the all components of the Catalyser for a period of 3 Power consumption: 580 W years. Mains fuse: 2x T5A Warranty claims may only be made upon presenta- Cord length: 1.8 m [70 inches]...
14. Troubleshooting Fault Possible cause Corrective action Catalyser fan fails to run. • Mains power cord not plugged in. • Plug the power cord in. • Control cord not connected. • Make sure the control cords is properly seated at both the oven and the Catalyser.