Agilent Technologies U1251A User's And Service Manual page 152

7 Performance Tests and Calibration
10 Press button to go to
A mode
m
11 Turn the Rotary Switch to the
mA.A position
Move the test lead from uA.mA and COM terminal to A and COM terminal
Caution:Connect calibrator to hanheld multimeter's A and COM terminal before applying 3A and 10A
Move the test lead from A and COM terminal to uA.mA and COM terminal
12 Press button to go to
mA mode
Move the test lead from uA.mA and COM terminal to A and COM terminal
Caution:Connect calibrator to hanheld multimeter's A and COM terminal before applying 3A and 10A
13 Press button to go to
A mode
152
500 A 30 A ,1 kHz
m m
300 A ,1 kHz
m
5000 A 300 A ,1 kHz
m m
3000 A , 1 kHz
m
Open Input terminal
open (Remove any
test leads and
Short Plugs from
the input terminal)
50 mA 30 mA
440 mA 300 mA
5 A 3 A
10 A 10 A
50 mA 3 mA, 1 kHz
30 mA, 1 kHz
440 mA 30 mA, 1 kHz
300 mA, 1 kHz
5 A 0.3 A, 1 kHz
3 A, 1 kHz
10 A 3 A, 1 kHz
10 A, 1 kHz
Agilent U1251A/U1252A User's and Service Guide
030.00 A 030.00
m
300.00 uA 300.00
0300.0 A 0300.0
m
3000.0 A 3000.0
m
oPEn oPEn
30.000 mA 30.000 mA
300.00 mA 300.00 mA
3.0000 A 3.0000 A
10.000 A 10.000 A
03.000 mA 03.000 mA
30.000 mA 30.000 mA
030.00 mA 030.00 mA
300.00 mA 300.00 mA
0.3000 A 0.3000 A
3.0000 A 3.0000 A
3.0000 A 3.0000 A
10.000 A 10.000 A
A
m
A
m
A
m
A
m