CONCORD 2800 Operator's Manual page 94

SYSTEM SETTINGS
Button
Control Valve Setup
Rate Sensor Setup
Tank Fill Settings
Display Setup Menu
Pressure Sensor Setup
Auxiliary Functions
Scale Setup
ALARM SETTINGS
Press the Alarm Settings tab to modify or update alarm settings such as Off Rate Alarm and the Minimum
Flow Rate. There is also an option to update the Pressure Alarm.
RATES SETUP
The Rates Setup tab allows the user to adjust the Preset Rate Values, Rate Bump, Rate Selection, and other
values entered during the original configuration.
FEATURE UNLOCKS
If there a additional features available for the RCM, enter the provided Activation Key to access these
features.
TOTALS
The totals button provides options to access a Current Totals, Device totals, and Distance totals tabs.
The Control Valve button allows the user to adjust the following settings for each
product:
• Valve Response Rate
• Control Deadband
• Valve Delay
• Valve Advance
• Control Effort
The Rate Sensor Setup button provides the options to adjust the following
settings:
• Flowmeter Calibration
• Flowmeter Pulse/Units
• Flowmeter Low Limit
• Tank Fill Flowmeter Calibration
• Tank Fill Flowmeter Pulse/Units
There is also the option to perform a catch test and applied product calibration.
This button allows the user to enter the Tank Capacity, Current Tank Level, and
Low Tank Level.
The Display Setup Menu allows the user to customize the main run screen object
pool.
This button allows the user to modify the alarm Min and Max for any products
that have pressure alarms selected.
The Auxiliary Functions button allows the user to create new or modify existing
auxiliary functions.
Scale Setup allows the user to configure scale options.
Description
3. Operation
93