CONCORD 2800 Operator's Manual page 113

3. Operation
21. Product Density and Calibration weight can be
entered here, however, if these values are not
known, they can be entered in the Rate Sensor
Setup Page. The hydraulic meter motor has 60
pulses/revolution:
22. The tank capacity in lbs may vary based on product
density, configure the bin levels for Product 2 as
shown. Tank Levels can be entered in the Tank Fill
Settings page.
23. The preset values do not affect machine performance
on a Hydraulic Drive, Enter Values you wish.
90 280 / 335 / 380 / 525 Bushel Air Carts
112
331451