1
Adhere the camera to the display cable (tape) and connect the camera cable to the camera and turn it over.
2
Using the alignment post, turn the camera over and adhere to the display back-cover.
3
Adhere the tape that secures the camera to the display back-cover.
1
Install the
display
panel.
2
Install the
display
bezel.
3
Install the
display
assembly.
4
Install the
WLAN
card.
5
Install the battery.
6
Install the
base
cover.
7
Follow the procedure in
Display back-cover
Removing the display back-cover
NOTE:
This procedure is not applicable to computers shipped with a WWAN configuration.
1
Follow the procedure in
2
Remove the
base
cover.
3
Remove the battery.
4
Remove the
WLAN
card.
5
Remove the
display
assembly.
6
Remove the
display
bezel.
7
Remove the
display
hinges.
8
Remove
thedisplay
panel.
9
Remove the
display
cable.
10
Remove the camera.
60
Removing and installing components
After working inside your
computer.
Before working inside your
computer.