Power Button With Fingerprint Reader - Dell Latitude 3301 Service Manual

1 Align the screw hole on the power-button board with the screw hole on the palm-rest and keyboard assembly.
2 Replace the screw (M1.6x2) that secures the power-button board to the palm-rest and keyboard assembly.
3 Align the screw hole on the power-button bracket with the screw hole on the palm-rest and keyboard assembly.
4 Replace the screw (M1.6x2) that secures the power-button bracket to the palm-rest and keyboard assembly.
1 Install the I/O board.
2 Install the fan.
3 Install the WLAN card.
4 Install the battery.
5 Install the base cover.
6 Follow the procedure in

Power button with fingerprint reader

Removing the power button with fingerprint reader
NOTE: This procedure is only applicable for computers shipped with a fingerprint reader.
1 Follow the procedure in
2 Remove the base cover.
3 Remove the battery.
4 Remove the WLAN card.
5 Remove the fan.
6 Remove the I/O board.
The following image indicates the location of power button with fingerprint reader and provides a visual representation of the removal
procedure.
After working inside your computer.
Before working inside your computer.
Removing and installing components 45