Installing the display cable
NOTE:
This procedure is not applicable to computers shipped with a WWAN configuration.
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of display cable and provides a visual representation of the installation procedure.
1
Adhere the tape securing the display cable to the back-cover.
2
Adhere the display cable to the display back-cover.
1
Install the
display
bezel.
2
Install the
display
panel.
3
Install the
display
assembly.
4
Install the battery.
5
Install the
base
cover.
6
Follow the procedure in
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
1
Follow the procedure in
2
Remove the
base
cover.
3
Remove the battery.
4
Remove the
WLAN
card.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
63