1
Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly.
2
Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3
Adhere the tapes that secure the speaker cable to the palm-rest and keyboard assembly.
4
Connect the speaker cable to the system board.
5
Connect the touchpad cable to the system board and close the latch to secure the cable.
1
Install the battery.
2
Install the
base
cover.
3
Follow the procedure in
WLAN card
Removing the WLAN card
1
Follow the procedure in
2
Remove the
base
cover.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
29