Loading Envelopes - Epson STYLUS SCAN 2500 Manual

Note that Ink Jet Cards may curl if you set the Printable Area to
Maximum when printing. If you are going to print on both sides
of these cards, print the printable side first, and then flatten the
cards (or bend them slightly in the opposite direction) before
printing the back side. Set the adjust lever to the "+" position
before printing on the second side.
About special media cleaning sheets
Cleaning sheets packaged with EPSON special media should not
be used with the Stylus Scan. These sheets are unnecessary, and
may cause jams.

Loading Envelopes

When printing on envelopes, please note the following:
❏ You can load up to 10 envelopes into the sheet feeder.
Note:
The folding quality and thickness of envelopes vary widely. If the
total thickness of the stack of envelopes exceeds 10 mm, press the
stack flat before loading.
❏ Set the adjust lever to the "+" position.
Note:
❏ Don't forget to return the adjust lever to the "0" position before
printing or copying on media of standard thickness. Leaving the
lever in the "+" position may cause gaps in the printed image.
❏ When the adjust lever is in the "+" position, make sure the High
Speed setting in the printer driver's Advanced dialog box is off.
To turn this option off, you may also need to change the Print
Quality setting.
51