Epson STYLUS SCAN 2500 Manual page 18

11. In the following window, move the slider to the right or left
until the two shades of gray horizontal stripes match.
Note:
The gray stripes will not perfectly blend together; however, try to
make the two tones match as closely as possible.
12. Click OK to register the calibration setting.
13. When the EPSON Stylus Scan Drivers installation is complete,
installation of other applications begins automatically. Follow
the on-screen instructions.
14. After all applications have been installed, a message appears
asking you to restart your computer. Click OK.
15. Restart the computer, then turn on the Stylus Scan by pressing
the P power button.
Note:
Do not change the printer name (leave it as EPSON Stylus Scan
2500), otherwise your Stylus Scan will not work correctly.
14