Flight Surfaces; Aileron Removal And Installation - Piper Malibu Meridian PA-46-500TP Airplane Maintenance Manual

1. Aileron (refer to Figure 1)
CAUTION: CONTROL SURFACE SKINS MUST BE REPLACED IF THEY SUSTAIN DAMAGE OR
EXHIBIT CRACKS.
A. Removal
(1) Remove the nut and bolt which secures the aileron drive sector to the yoke in the aileron.
(2) Support the aileron and remove the three aileron hinge bolts.
(3) Remove the aileron.
B. Installation
WARNING: ALL CONTROL SURFACES THAT HAVE BEEN REPLACED OR REPAINTED MUST
BE BALANCED PER BALANCING, BELOW, BEFORE INSTALLATION.
(1) Position the aileron on the trailing edge of the wing.
(2) Install the attaching nuts, bolts and washers.
(3) Attach the aileron drive sector to the yoke in the aileron with the previously removed nut, bolt
and washers.
(4) Actuate the aileron controls to ensure freedom of movement.
6K21
PIPER AIRCRAFT, INC.
PA-46-500TP, MALIBU MERIDIAN
MAINTENANCE MANUAL

FLIGHT SURFACES

Aileron Installation
Figure 1
57-50-00
Apr 15/07
PAGE 1