C.
Cover safety and outflow valves, air conditioning condenser, and other components on the pressure
bulkhead. Cover autopilot servos, electrical connectors, and cable pulleys.
WARNING: DO NOT GET DINITROL INTO AUTOPILOT SERVOS OR CLUTCHES.
D.
Spray directly into faying surfaces and mating points.
E.
Ensure entire attach fitting is treated. Spray inside where the fitting is attached to the structure.
F.
Apply to approximately .8 mils in thickness. Avoid puddling and running. Allow to dry 1 to 1 1/2
hours before airplane use. Full drying takes 6 to 8 hours.
55-30-00
PAGE 2
Apr 15/07
PIPER AIRCRAFT, INC.
PA-46-500TP, MALIBU MERIDIAN
MAINTENANCE MANUAL
Vertical Stabilizer Attach Fittings
Figure 1
6I4