C.
Cover autopilot servos, electrical connectors, and cable pulleys.
WARNING: DO NOT GET DINITROL INTO AUTOPILOT SERVOS OR CLUTCHES.
D.
Spray directly into faying surfaces and mating points.
E.
Ensure entire attach fitting is treated. Spray inside where the fitting is attached to the structure.
F.
Apply to approximately .8 mils in thickness. Avoid puddling and running. Allow to dry 1 to 1 1/2
hours before airplane use. Full drying takes 6 to 8 hours.
57-40-00
PAGE 18
Apr 15/07
PIPER AIRCRAFT, INC.
PA-46-500TP, MALIBU MERIDIAN
MAINTENANCE MANUAL
Attach Fittings Corrosion Control
Figure 9
6K18