Seat Back Angle Adjustment; Swivel Seat - Rascal Vecta Sport Owners Manual & Service Record

Seat back angle
adjustment
The seat back angle can be adjusted by:
1. Sitting very gently against the back rest
and pulling the lever (see Fig.11). The seat back
will unlock.
2. Angle your back to the desired position and
then release the lever. The seat back will lock in
the new position.
Tip: If you wish to flatten the seat for storage, use
the same lever whilst standing next to the scooter
and gripping the seat-back with the other hand.
Pull the lever and fold the seat forwards.
11
Warning!
Make sure you are ready for the
seat back to release as you could topple
backwards a little if taken by surprise!
12

Swivel seat

This allows easy access
1. To operate, locate the release lever under the
seat (Fig.12).
2. Pull the lever up and the seat will release
allowing it to rotate.
3. Release the lever and the seat should lock
automatically, but always check it has.
12
Warning!
Do not use this device if the vehicle
is on a slope. Always check the seat is locked
in the forward position before driving the vehicle.
Rascal Vecta Sport Scooter Owner's Manual and Service Record