Advertisement
Quick Links
NOTE:
The eSPARK must be traveling up to 3 mph before motor will engage. Kick
start up to 3 mph while applying the throttle to engage motor.
OWNER'S MANUAL
Read and understand this entire manual before riding!
DO NOT RETURN TO STORE!
NOTE: Manual illustrations are for demonstration purposes only. Illustrations
may not reflect exact appearance of actual product. Specifications subject to
change without notice.
Please have your 19 digit product I.D. code ready before contacting Razor for
warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________
v1_08_12
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Razor eSpark
Summary of Contents for Razor eSpark
- Page 1 NOTE: The eSPARK must be traveling up to 3 mph before motor will engage. Kick start up to 3 mph while applying the throttle to engage motor. OWNER’S MANUAL Read and understand this entire manual before riding! DO NOT RETURN TO STORE! NOTE: Manual illustrations are for demonstration purposes only.
-
Page 2: Table Of Contents
Fire Hazard Zone. CHECK AND MAINTAIN SCOOTER CONDITIONS • Never use your scooter to try to start a fire. Your eSpark™ scooter emits Before use, check to confirm that any and all chain guards or other localized sparks when the Spark Bar on a moving scooter comes in contact covers and guards are in place and in serviceable condition. -
Page 3: Safety Warnings
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the white label on your product or back of charger) available for better assistance. -
Page 4: Before You Begin
Estimated Assembly and Set-Up Time equipment supplied at the time Razor recommends assembly by an adult with experience in bicycle mechanics. of sale was selected on the basis Allow up to 10 minutes for assembly, not including initial charge time. -
Page 5: Assembly And Set-Up/Usage/Charging Battery
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the white label on your product or back of charger) available for better assistance. - Page 6 USAGE Note: Electric scooter must q Starting the Scooter be moving at 3 mph/5 kmh To start unit, turn on power switch; place both hands on handlebars and kick start the unit, using one while applying throttle to foot to push scooter forward while applying the throttle with right hand. The scooter must accelerate to engage motor.
-
Page 7: Pre-Ride Checklist
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the white label on your product or back of charger) available for better assistance. - Page 8 REPAIR AND MAINTENANCE q Front Wheel Replacement Note: Front wheel hardware sequence Tools required: 10mm wrench and two (2) 16mm wrenches. Right Side (Throttle) 8-4 Spacer 8-3 Washer Using two (2) 16mm wrenches, Reassemble, adjust and Using a 10mm wrench, loosen the locknuts by turning the tighten brake cable.
- Page 9 Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the white label on your product or back of charger) available for better assistance.
- Page 10 If acid comes into contact with skin or eyes, flush with cool water Disposal: Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an for at least 15 minutes and contact environmentally safe manner. Do not dispose of a lead-acid battery in a fire. The battery may explode or leak.
-
Page 11: Troubleshooting Guide
*Unit(s) should be turned off and fully charged prior to doing any Troubleshooting NOTE: All troubleshooting steps should be performed by an adult only TROUBLESHOOTING GUIDE Problem Possible Cause Solution Does Not Work Out Of The Box Unit must be traveling up to 3 mph before Kickstart to 3 mph while applying the throttle to motor will engage engage motor... -
Page 12: Espark Parts
PARTS Maintain your scooter with genuine Razor parts. Visit our website or e-mail us for more information on spare part availability. (Specifications subject to change without notice.) 01 Handlebar Grip (right/left) 10 Front Wheel Complete 18 Rear Wheel Complete... - Page 13 SB 1918 (CALIFORNIA) DECLARATION YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS SCOOTER/ELECTRIC RIDE-ON PRODUCT. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.
-
Page 14: Warranty
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the product I.D. code (located on the white label on your product or back of charger) available for better assistance.
Need help?
Do you have a question about the eSpark and is the answer not in the manual?
Questions and answers