Page 1
Illustrations may not refl ect exact appearance of actual product. Specifi cations subject to change without notice. Please have your 19 character product I.D. code ready before contacting Razor for warranty assistance and/or replacement parts. Product I.D. Code: _____________ - ____________ - ____________...
Repair and Maintenance................7-9 Assembly and Set-Up..................3-4 Troubleshooting Guide ................... 10 Charging the Battery ..................5 E200/E200S Electric Scooter Parts ..............11 Pre-Ride Checklist .................... 5 Warranty ......................14 SAFETY WARNINGS Maintain a hold on the handlebars at all times. Do not touch the brakes or...
(E200s only) Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time. Please have the product I.D. code (located on the...
ASSEMBLY AND SET -UP q Attaching the Handlebars Note: Make sure any cables/wires are out of the way before inserting Tools Required: 5 mm Allen wrench the stem into the fork. WARNING: Failure to properly tighten the collar clamp may allow the handlebars to dislodge while riding and may cause you to lose control and fall.
Page 6
Tighten securely. The seat tilt adjustment should not move when riding. Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time. Please have the product I.D. code (located on the...
CHARGING THE BATTERY Your electric scooter may not have a fully charged battery; therefore you must charge the battery prior to use. WARNING: Use ONLY with the recommended charger. Batteries • Initial charge time: 12 hours. • Make sure the power switch is turned OFF when are only to be charged under unit is not in use.
E300 Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacifi c Time. Please have the product I.D. code (located on the...
REPAIR AND MAINTENANCE Turn power switch “OFF” before beginning repair or maintenance: • Read the instructions • Secure the unit under repair • Contact Razor customer service if unsure about any repair or • Remove charger plug • Exercise caution around...
Page 10
REPAIR AND MAINTENANCE Cable Guide Reassembly Bracket Frame Spacer Note: Front wheel hardware sequence. Bolt Washer Brake Plate Install the chain onto the rear Install the cable guide brack- Verify chain is properly installed E300 wheel sprocket. Slip wheel axle on each sprocket and tensioner is et to the frame and brake plate into the frame slots.
Page 11
• Call 866-467-2967 for the center nearest you. Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time. Please have the product I.D. code (located on the...
For more troubleshooting tips, a list of available replacement parts or to locate an authorized Service Center in your area, visit our website at www.razor.com or call toll free 866-467-2967 to speak to a live Customer Service Representative Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
E200/E200S ELECTRIC SCOOTER PARTS Keep your scooter running for years with genuine Razor parts. Visit our website or e-mail us for more information on spare part availability. (Specifications subject to change without notice.) 1. Handlebar Grip (right/left 9. Front Wheel Complete 18.
Page 15
NOTICE: INSURANCE YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS SCOOTER/ELECTRIC RIDE-ON PRODUCT. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR AGENT.
Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time. Please have the product I.D. code (located on the bottom of the frame) available for better assistance.
Need help?
Do you have a question about the E200S and is the answer not in the manual?
Questions and answers