Honda XR150 2018 Owner's Manual page 84

Tyre Puncture Removing Wheels
u
Installation
Attach the side collar and speedometer
1.
gearbox to the front wheel.
Position the wheel between the fork legs
2.
and insert the front axle shaft from the
right side, through the right fork leg and
wheel hub.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Slot
Lug
80
Make sure that the lug on the right fork
3.
leg is located in the slot of the
speedometer gearbox.
Tighten the front axle nut.
4.
Torque: 44 N·m (4.5 kgf·m, 32 lbf·ft)
After installing the wheel, apply the brake
5.
lever several times, and then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel dose not
rotate freely.
Install the speedometer cable and tighten
6.
the speedometer cable set screw securely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.