Presetting The Zoom And Angle Settings; Recalling A Preset Zoom And Angle Setting - Sony IPELA PCS-TL33 Operating Instructions Manual

Presetting the Zoom and Angle
Settings
Up to six preset settings for zoom and camera angle can be
registered in the Camera Control menu. Once you have
stored the settings, you can easily recall them to move the
camera.
1
In the Camera Control menu, under "Preset", click the
desired number (1 - 6).
Camera Control
Preset Preset
1
Save 2 Load
3
4
Backlight Compensation
5
Flicker Removal
6
Cancel
White Balance
Auto
Start
Adjust
Brightness Adjust
Auto Adjust
Right-click the mouse to display a help message.
Note
During a communication session, you can select the
remote camera.
For information on how to bring up the Camera
Control menu and selecting a camera, see "Adjusting
the Zoom and Camera Angle" on page 58.
2
Adjust the zoom and angle.
For information on how to make the adjustment, see
"Adjusting the Zoom and Camera Angle" on page 58.
3
Click "Save".
The setting is registered in the selected preset number.
Recalling a Preset Zoom and Angle
Setting
You can use the Camera Control menu to recall a preset
zoom and camera angle setting.
1
In the Camera Control menu, under "Preset", click the
desired number (1 - 6).
60
Adjusting the Camera
Zoom
Control by Far End
IP:012.345.678.912
Camera Control
Preset Preset
1
Save 2 Load
3
4
Backlight Compensation
5
Flicker Removal
6
Cancel
White Balance
Auto
Start
Adjust
Brightness Adjust
Auto Adjust
Right-click the mouse to display a help message.
Note
During a communication session, you can select the
remote camera.
For information on how to bring up the Camera
Control menu and selecting a camera, see "Adjusting
the Zoom and Camera Angle" on page 58.
2
Click "Load".
The setting of the preset number is recalled and the
camera moves to the position of that setting.
About stored adjustment settings
The PCS-TL33 retains the settings for camera zoom and
angle, brightness, backlight compensation on/off and
flicker on/off in non-volatile memory.
When you turn off the system and turn it on again, the
camera will be adjusted using the stored settings.
Zoom
Control by Far End
IP:012.345.678.912