Audio Setup Menu; Network Setup Menu - Sony IPELA PCS-TL33 Operating Instructions Manual
Video communication system
Hide thumbs
Also See for IPELA PCS-TL33:
- Quick start manual (131 pages) ,
- System integration manual (7 pages) ,
- Manual (7 pages)
Table of Contents
Advertisement
Audio Setup Menu
The Audio Setup menu is used to set various audio items.
Page 1/1
The level meter indicating the audio input level is
displayed.
Audio Setup
Mic Lavel Meter
On
Off
Beep Sound
Sound Effect
On
Off
On
Off
Dial Tone
Ringer Level
Min
Headphone Ringer Level
Min
PC Volume
Call Volume
OK
Cancel
IP:012.345.678.912
Right-click the mouse to display a help message.
Beep Sound
Selects whether the beep sounds when you perform a
mouse operation.
On: Enables beep.
Off: Disables beep.
Sound Effect
Selects whether or not to output the sound when the system
starts up, a videoconference starts, a videoconference
ends, or a videoconference using SIP is put on hold.
On: Outputs the sound.
Off: Does not output the sound.
Dial Tone
Selects whether or not to output a dial tone when you are
dialing.
On: Outputs the dial tone.
Off: Does not output the dial tone.
Ringer Level
Selects the ringer volume when you receive a call.
To disable the ringer tone, select the “Off” setting.
To use the ringer tone, select one of the following settings:
“Min”, “Mid”, “Loud”.
Headphone Ringer Level
Use this item to select the headphone ringer volume for
incoming calls.
To disable the ringer tone, select the “Off” setting.
To use the ringer tone, select one of the following settings:
“Min”, “Mid”, “Loud”.
PC Volume
Use this item to set the speaker/headphone volume for the
computer display.
Call Volume
Use this item to set the speaker/headphone volume for
videoconferences.
Network Setup Menu
Lets you make LAN and SIP related settings.
For details on the settings, consult with the network
administrator.
For details on setting up each network using LAN, see
“Setting Up the Network Configurations” on page 43.
For details on videoconferencing using SIP, see chapter 7.
Note
The SIP Setup menu can be accessed only if the optional
SIP software PCSA-SP1 is installed.
LAN Page 1/3
1/3
LAN
LAN
DHCP Mode
Auto
Off
SIP
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
OK
Cancel
IP:012.345.678.912
Right-click the mouse to display a help message.
DHCP Mode
Selects whether DHCP (Dynamic Host Configuration
Protocol) server is enabled or not.
Auto: The IP address and subnet mask are automatically
assigned.
In this case, confirm the assigned IP address, subnet
mask, gateway address, and DNS address in the
launcher menu or the Machine Information menu after
the LAN connection is completed.
Off: Sets “DHCP Mode” to “Off”. In this case, enter the IP
address, subnet mask, gateway address, and DNS
address.
Host Name
Enter the host name.
IP Address
Enter the IP address.
Page 27
Advertisement
Table of Contents
