Lan (Pppoe Connections) - Sony IPELA PCS-TL33 Operating Instructions Manual

LAN (PPPoE Connections)

When using PPPoE, you can connect via LAN without a
router.
A modem (using bridge mode) is required when using
FLET'S ADSL.
Configuration example
B FLET'S
Local IP
network
ONU
210.10.10.10
1
Set "PPPoE" to "On" under Page 9/11 of the
Administrator Setup menu, and enter the PPPoE user
name and PPPoE password given to you by the
provider.
If you have a fixed IP from the provider, set "Fixed IP
for PPPoE" to "On", and enter your fixed IP address
for PPPoE in "Fixed IP Address for PPPoE".
Administrator Setup
PPPoE
PPPoE User Name
PPPoE Password
Fixed IP for PPPoE
Fixed IP Address for PPPoE
PPPoE DNS
Primary DNS
Secondary DNS
OK
Right-click the mouse to display a help message.
The setting has been configured properly if the correct
IP address appears in the launcher menu.
Notes
• If the fixed DNS server address is specified by the
provider, set "PPPoE DNS" to "Specify", and enter
the specific addresses in "Primary DNS" and
"Secondary DNS".
• The information that appears in the launcher menu
may differ depending on the "Number Display"
setting in the Device Setup menu. You can also click
the Number Display portion and select the
information to display from a list.
2
Remote parties must configure in the same way.
Internet
ONU
211.10.10.10
9/11
On Off
abc@example.com
1234567890
On Off
210.10.10.10
Obtain Automatically
Cancel
IP:012.345.678.912
To conduct a video conference
Select "IP" for the line interface, enter the remote party's
IP address in the text box, and dial.
You can set "IP" as the default line interface selection for
the launcher menu by setting "Line I/F" to "IP" in the Dial
settings of the Communication Mode menu.
For details on the setting, see "Communication Mode
Menu" on page 29.
Setting Up the Network Configurations
47