System Connections; About The Connectors; Connection Precautions; System Connection Via A Lan - Sony IPELA PCS-TL33 Operating Instructions Manual

System Connections

This section describes the typical system connections.

About the Connectors

The connectors of the system are located under the rear
cover. Remove the cover to make connections, and then
replace the cover again.
To remove the rear cover
Pull the rear cover toward you.
Connector
panel (under
rear cover)

System Connection via a LAN

Make connections in the order 1 - 5.
Video Communication
System PCS-TL33
To attach the rear cover
Push the cover in while aligning the four stubs.

Connection Precautions

Warning
• Use only the supplied AC adapter and power cord.
• When connecting the power cord of the AC adapter and
the DC cable, insert the plugs fully and securely.
• For safety, do not connect the 100BASE-TX/10BASE-T
connector to a network where excessive voltages may
occur.
Caution
• Before making any connections, be sure to turn power to
all components off.
• To prevent damage to the unit, do not plug in or
disconnect any cable while power to the unit is turned
on.
AC adapter VGP-AC19V15
(supplied)
3 To DC19.5V
connector
To 100BASE-TX/ 2
10BASE-T port
UTP cable Category 5 (straight cable, commercially available)
4 Power cord (supplied)
5 To AC outlet
(120 V AC)
Optical mouse PCS-RMU1
1 To mouse port
(supplied)
To LAN
15
System Connections