Replacing The Solid-State Drive; Procedure; Post-Requisites - Dell XPS 13 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.

Procedure

1. Align the notches on the solid-state drive with the tabs in the solid-state drive slot, then slide the solid-state drive at an angle into the
solid-state drive slot.
2. Slide the solid-state drive shield into the solid-state drive shield slot. Then align the screw hole on the solid-state drive shield and solid-
state drive to the screw hold on the system board.
3. Replace the screw (M2x3L) that secures the solid-state drive to the system board.

Post-requisites

Replace the base cover.
18

Replacing the solid-state drive

Replacing the solid-state drive
computer. After working inside your computer, follow the instructions in
8
After