Replacing The Power Button With Optional Fingerprint Reader; Procedure; Post-Requisites - Dell XPS 13 Service Manual

Hide thumbs Also See for XPS 13:

Table of Contents

Replacing the power button with optional

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your

working inside your

computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

NOTE:

If the power button does not include the optional fingerprint reader, perform only steps 2 and 3. Complete all

steps if the power button includes the fingerprint reader.

1. Place the fingerprint-reader board into its slot on the palm-rest assembly.

2. Place the power button into its slot on the palm-rest assembly.

3. Pressing down on the power button, replace the two screws (M1.4x1.7) that secure the power button to the palm-rest assembly.

4. Adhere the power button cable to the keyboard.

5. Replace the screw (M1.6x1.5) that secures the fingerprint-reader board to the palm-rest assembly.

1. Replace the

system

board.

2. Replace the fans.

3. Replace the

solid-state

drive.

4. Replace the battery.

5. Replace the

base

cover.

Replacing the power button with optional fingerprint reader

computer. After working inside your computer, follow the instructions in

fingerprint reader

After

Table of Contents