Miele EVS 7010 Operating And Installation Instructions page 8

Built-in vacuum drawer
Table of Contents

Advertisement

Warning and Safety instructions
This drawer must not be used in a non-stationary location (e.g. on
a ship).
Never open the casing of the drawer.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
Do not operate the drawer with wet hands or if you are in contact
with water.
While the appliance is under warranty, repairs should only be un-
dertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.
Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
If the plug is removed from the connection cable or if the cable is
supplied without a plug, the drawer must be connected to the elec-
trical supply by a suitably qualified electrician.
If the connection cable is damaged, it must be replaced with a
special connection cable (see "Electrical connection").
If power is interrupted during vacuum sealing the vacuum in the
chamber is retained and the glass lid cannot be opened. Do not un-
der any circumstances try to force the glass lid open or use tools to
open it. You will be able to open the lid when power has been re-
stored.
During installation, maintenance and repair work, the drawer must
be disconnected from the mains electricity supply.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evs 7110

Table of Contents