NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Using the alignment posts, place the I/O board on the palm rest and keyboard assembly.
2. Replace the screw(s) (M2x4) that secure the I/O board to the palm rest and keyboard assembly.
3. Adhere the I/O-board cable to the palm rest and keyboard assembly.
4. Connect the I/O-board cable to the system board and close the latch to secure the cable.
5. Connect the coin-cell battery cable to the I/O board (Applicable only for computers shipped without optical drive).
Post-requisites
1. Replace the
hard
drive.
2. Replace the battery.
3. Replace the
base
cover.
4. Replace the
optical drive
(optional).
56
Replacing the I/O board
Replacing the I/O board
computer. After working inside your computer, follow the instructions in
34
After