Replacing The Power-Button Board; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Place the power-button board on the palm rest and keyboard assembly and align the screw hole on the power-button board with the
screw hole on the palm rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power-button board to the palm rest and keyboard assembly.
3. Adhere the tape that secures the power-button board to the palm rest and keyboard assembly.
4. Slide the power-button cable to the system board and close the latch to secure the cable.
5. Close the left hinge.
6. Replace the two screws (M2.5x5) that secure the left hinge to palm rest and keyboard assembly.
NOTE: For computers shipped without optical drive, there is an additional screw on the left hinge that secures the
left hinge to palm rest and keyboard assembly.
Post-requisites
1. Replace the fan.
2. Replace the base cover.
3. Replace the optical drive (optional).

Replacing the power-button board

computer. After working inside your computer, follow the instructions in
Replacing the power-button board
36
After
59