Adding A Controller In The Sphinx4 Software - KEYKING C2100 User Manual

Keyking Group
Port #8000 cannot be occupied by another system. If port #8000 is in use then use
another port like #8001.
2. Save all changes and restart the router..

6.3 Adding a Controller in the Sphinx4 Software

1. Run Sphinx4.
2. Click Setup/Hardware/Controller Configuration and the below image will appear.
3. Click the "Add" button and the following image will appear. Proceed as listed in
the image.
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
Tel: (972) 3-5753606/7 Fax: (972) 3-5753608 Website: www.key-king.com
Click the
Add button
C2100 User Manual V 1.01
Page 27