Setting The Server Ip Address - KEYKING C2100 User Manual

Keyking Group
5. Click "Network Setting", and the following image will appear. Allocate the C2100 a static
IP Address, for example 192.168.1.100. Then click "Update Setting". A message
will appear to say that the software "Can not find the page".
6. Done.

4.2 Setting the Server IP Address

1. Switch DIP1 to ON, and DIP2 to OFF. DIP3 and DIP4 should be OFF.
2. Allocate the PC an IP address in the same subnet as the C2100. If the IP address of
the C2100 is 192.168.1.100, then the PC IP address should be 192.168.1.X where
X equals any number between 2 and 254 except 100 which is the same IP address
as the C2100.
3. Open Windows browser, and type http://192.168.1.100. The Logon interface will
appear. Click "Port0 Setting"and the following image will appear.
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
Tel: (972) 3-5753606/7 Fax: (972) 3-5753608 Website: www.key-king.com
C2100 User Manual V 1.01
Image #4-4
Image #4-5
Host IP, please change to the Host
IP, like 192.168.1.4
Page 16