Table of Contents
Advertisement
Keyking Group
6.1 Setup the C2100 in LAN2
Connect the C2100 to a PC directly and setup all parameters as follows.
1.
Allocate the C2100 a fixed IP, eg 192.168.1.100, and setup the Gateway to
192.168.1.1.
2.
Setup the Telnet Server IP to the Router #1 eg 124.93.56.37 .
3.
Setup the C2100 to work under "TCP Server" mode.
6.2 Map the Port of #2 Router to C2100
On the C2100 location side of the internet, ADSL or a popular internet such as VPN can be
used. Even though a fixed IP address for this Router is preferable, this is not mandatory as a
dynamic IP address will suffice.
Using an administrator password connect to Router #2 through the Windows browser by
typing http://192.168.1.1.
1.
Establish the Map function for the C2100 and select a free port (eg 8000)
map rule Intranet 192.168.1.100:8000; Extranet8000. protocol: TCP
Eg:
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
Tel: (972) 3-5753606/7 Fax: (972) 3-5753608 Website: www.key-king.com
C2100 User Manual V 1.01
Page 26
Advertisement
Table of Contents
