Com Port Parameters; Port0 Setting (Serial Com Port); Port Parameters (Tcp Port) - KEYKING C2100 User Manual

Keyking Group

3.4 COM Port Parameters

Click "Port0 Settings" in image #3-3, then image #3-4 will appear.

3.4.1 Port0 Setting (Serial COM Port):

Baud Rate:
Data Size:
Parity:
Stop Bits:
Flow Control:

3.4.2 Port Parameters (TCP Port)

Local Telnet Port:
Remote Telnet Port:
Telnet Mode:
 TCP Server, C2100 will wait for the link command from the Host (for example: a
PC).
 TCP Client, C2100 will look for the Host (for example: a PC), and send a link
command to the Host. "TCP Client" mode use is recommended
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
Tel: (972) 3-5753606/7 Fax: (972) 3-5753608 Website: www.key-king.com
Image #3-4
Default value is 9600bps
Data Length, default value is 8 bits
Odd/Even Parity, default is None.
Default is 1bit
Default is None.
The local Port of C2100, default value is 8000
The Host Port, default value is 8000
Work Mode, TCP/IP or Client, default is Client.
C2100 User Manual V 1.01
Host IP, please change to the Host
IP, like 192.168.1.4
Page 11