Chapter 4: Setting Steps; Setting A New Ip Address For The C2100 - KEYKING C2100 User Manual

Keyking Group

Chapter 4: Setting Steps

If the IP of the C2100 is not known and the default IP address of 192.168.1.100 is uncertain,
follow the steps below:
Prior to installation please ensure either one of the following:

Only connect 1 x C2100 converter in this network.

If connecting multiple C2100 converters they must have different fixed IP addresses.

Connect the C2100 to a PC directly, as per the image below.

4.1 Setting a New IP Address for the C2100

If you know the password and the IP address of the C2100, please proceed directly to Section 4.2.
1. Switch DIP1 and DIP2 to ON, DIP3 and DIP4 should be OFF.
2. Setup the IP address of the PC to 10.0.0.X, with X being any number from 1 to 254
except 10.
3. Open Windows Browser, and type
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
Tel: (972) 3-5753606/7 Fax: (972) 3-5753608 Website: www.key-king.com
Image #4-1
http://10.0.0.10 and the following image will appear:
C2100 User Manual V 1.01
Page 14