Table of Contents
Advertisement
Keyking Group
5.1 Setup C2100 in LAN2
Connect the C2100 to a PC directly and setup all parameters as follows.
1.
Allocate the C2100 a fixed IP, like 192.168.1.100, and setup the Gateway to
192.168.1.1.
2.
Setup the Telnet Server IP to the Router #1 (eg 124.93.56.37).
3.
Setup the C2100 to work under "TCP Client" mode.
5.2 Map the Port of #1 Router to Host PC
Allocate a fixed IP to the Host Server, eg 192.168.0.2, and setup the Gateway to 192.168.0.1.
With the administrator password, logon to Router #1 by typing
1.
Establish the Map function for the Host, select a free port (eg 8000)
Eg: map rule
2.
Port #8000 cannot be occupied by another system. If port #8000 is in use then use
another port like #8001.
3.
Save all changes and restart the router.
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
Tel: (972) 3-5753606/7 Fax: (972) 3-5753608 Website: www.key-king.com
Intranet 192.168.0.2:8000; Extranet8000. protocol: TCP
C2100 User Manual V 1.01
http://192.168.0.1
.
Page 21
Advertisement
Table of Contents
