Yamaha YZF-R3 2020 Owner's Manual page 24

Instrument and control functions
TIP
To reset the average fuel con-
sumption display, set it as the dis-
play item, and then push the
"RESET" button for one second.
After resetting the average fuel
consumption display, "_ _._" is
shown until the vehicle has trav-
eled 1 km (0.6 mi).
Oil change tripmeter
4
1. Oil change indicator "OIL"
2. Oil change tripmeter
The oil change tripmeter shows the
distance traveled since the last engine
oil change. The oil change indicator
"OIL" will first flash at 1000 km (600
mi), then 4000 km (2400 mi) later, and
then every 5000 km (3000 mi) to re-
mind you that the engine oil should be
changed.
After changing the engine oil, be sure
to reset the oil change tripmeter and
the oil change indicator. To reset them,
select the oil change tripmeter, and
then push the "RESET" button for one
second. Then, while "OIL" and the oil
change tripmeter are flashing, push the
"RESET" button again for three sec-
onds.
MPH
1 2
TIP
If you change the oil before the oil
change indicator comes on, you must
still reset the oil change tripmeter. Oth-
erwise, the oil change indicator will
come on prematurely.
Shift indicator light
1. Shift indicator light
2. Brightness level display
The shift indicator light has four set-
tings which can be adjusted.
Flashing pattern: turn the indicator
light on or off, and when set to on
select how the indicator will illumi-
nate.
Activation point: select the engine
speed at which the indicator light
is activated.
Deactivation point: select the en-
gine speed at which the indicator
light is deactivated.
Brightness: adjust the brightness
of the indicator light.
To adjust the shift indicator light
1. Turn the main switch off.
2. Hold the
pushed.
4-8
1
MPH
2
"SELECT" button