Toyota Corolla Hatchback 2019 Owner's Manual page 52

52
1-2. Child safety
and forth to ensure that it is
installed securely. (P.53)
Booster seat
■
1
If installing the child restraint
system to the front passen-
ger seat is unavoidable, refer
to P.47for front passenger
seat adjustment.
2
High back type: If the head
restraint interferes with your
child restraint system, and
the head restraint can be
removed, remove the head
restraint. (P.112)
3
Place the child restraint sys-
tem on the seat facing the
front of the vehicle.
Booster type

High back type

4
Sit the child in the child
restraint system. Fit the seat
COROLLA H/B_U
belt to the child restraint sys-
tem according to the manu-
facturer's instructions and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
Check that the shoulder belt is cor-
rectly positioned over the child's
shoulder and that the lap belt is as
low as possible. (P.25)
Removing a child restraint
■
system installed with a seat
belt
Press the buckle release button
and fully retract the seat belt.
When releasing the buckle, the
child restraint system may spring
up due to the rebound of the seat
cushion. Release the buckle while
holding down the child restraint
system.
Since the seat belt automatically
reels itself, slowly return it to the
stowing position.