Toyota Corolla Hatchback 2019 Owner's Manual page 212

212
4-5. Using the driving support systems
When there are no longer any preceding vehicles driving slower
than the set speed
The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
Setting the vehicle speed
(vehicle-to-vehicle dis-
tance control mode)
1
Press the cruise control main
switch to activate the cruise
control.
Radar cruise control indicator will
come on and a message will be dis-
played on the multi-information dis-
play. Press the switch again to
deactivate the cruise control.
If the cruise control main switch is
pressed and held for 1.5 seconds
or more, the system turns on in
constant speed control mode.
(P.215)
2
Accelerate or decelerate,
with accelerator pedal opera-
tion, to the desired vehicle
speed (at or above approxi-
mately 20 mph [30 km/h])
and press the "-SET" switch
to set the speed.
Cruise control "SET" indicator will
come on.
The vehicle speed at the moment
the switch is released becomes the
COROLLA H/B_U
set speed.
Adjusting the set speed
To change the set speed, press
the "+RES" or "-SET" switch
until the desired set speed is
displayed.
1
Increases the speed
2
Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold
the switch to change the speed,
and release when the desired
speed is reached.
In the vehicle-to-vehicle dis-
tance control mode, the set
speed will be increased or