Toyota Corolla Hatchback 2019 Owner's Manual page 348

348
5-14. Phone settings
®
Bluetooth phone to this sys-
tem.
1
Connect a USB device.
(P.287)
2
Select "Transfer Contacts
from Device".
3
Select "From USB".
4
Select "USB 1" or "USB 2"
when the multiple USB
devices are connected. If a
USB device is connected,
skip this procedure.
5
Select "Replace Contacts" or
"Add Contact". If the contact
is already registered, skip
this procedure.
"Replace Contacts": Select to trans-
fer the contact from the connected
USB device or Bluetooth
and replace the current one.
"Add Contact": Select to transfer
the desired contact data from the
connected USB device or Blue-
®
tooth phone to add to the current
one.
6
Select a desired file from
vCard file list.
7
Check that a confirmation
screen is displayed when the
operation is complete.
● Depending on the type of Blue-
®
tooth phone used and number of
files, it may take time to display
vCard file lists and download con-
tacts.
● Downloading may not complete
correctly in the following cases:
• If the engine switch is turned off
during downloading.
• If the USB device or Bluetooth
phone is removed before down-
COROLLA H/B_U
loading is complete.
Registering a new contact
to the contacts list
New contact data can be regis-
tered.
Up to 4 numbers per person can
be registered. For PBAP com-
patible Bluetooth
function is available when "Auto-
matic Transfer" is set to off.
(P.345)
1
Select "New Contact".
2
Enter the name and select
"OK".
3
Enter the phone number and
select "OK".
4
Select the phone type for the
®
phone
phone number.
5
To add another number to
this contact, select "Yes".
Registering a new contact
■
in a different way (from the
call history screen)
1
Display the phone top
screen. (P.327)
2
Select "History" and select a
contact not yet registered in
the contact list.
3
Select "Add to Contacts".
4
Follow the steps in "Register-
ing a new contact to the con-
tacts list" from step 2.
(P.348)
®
®
phones, this