220
4-5. Using the driving support systems
era.
●
The sign is dirty, faded, tilted or
bent, and if an electronic sign, the
contrast is poor.
●
All or part of the sign is hidden by
the leaves of a tree, a pole, etc.
●
The sign is only visible to the front
camera for a short amount of time.
●
The driving scene (turning, lane
change, etc.) is judged incorrectly.
●
Even if it is a sign not appropriate
for the currently traveled lane,
such a sign exists directly after a
freeway branches, or in an adja-
cent lane just before merging.
●
Stickers are attached to the rear of
the preceding vehicle.
●
A sign resembling a system com-
patible sign is recognized.
●
Side road speed signs may be
detected and displayed (if posi-
tioned in sight of the front camera)
while the vehicle is traveling on
the main road.
●
Roundabout exit road speed signs
may be detected and displayed (if
positioned in sight of the camera
sensor) while traveling on a
roundabout.
●
The front of the vehicle is raised or
lowered due to the carried load.
●
The surrounding brightness is not
sufficient or changes suddenly.
●
When a sign intended for trucks,
etc. is recognized.
■
Speed limit sign display
If the engine switch was last turned
off while a speed limit sign was dis-
played on the multi-information dis-
play, the same sign displays again
when the engine switch is turned to
ON.
■
If "RSA Malfunction Visit Your
Dealer" is shown
The system may be malfunctioning.
Have the vehicle inspected by your
Toyota dealer.
COROLLA H/B_U
■
Customization
Some functions can be customized.
(P.519)