Toyota Corolla Hatchback 2019 Owner's Manual page 203

vehicle-to-vehicle distance
control mode)
2
Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold
the switch to change the speed,
and release when the desired
speed is reached.
In the vehicle-to-vehicle dis-
tance control mode, the set
speed will be increased or
decreased as follows:
For the U.S. mainland, Hawaii

Fine adjustment: By 1 mph (1.6
*1
km/h) or 1 km/h (0.6 mph)
time the switch is pressed
Large adjustment: Increases or
decreases in 1 mph (1.6 km/h)
1 km/h (0.6 mph)
as long as the switch is held
For Canada, Guam and

Puerto Rico
Fine adjustment: By 1 mph (1.6
*1
km/h) or 1 km/h (0.6 mph)
time the switch is pressed
Large adjustment: Increases or
decreases in 5 mph (8 km/h)
*2
km/h (3.1 mph)
long as the switch is held
In the constant speed control
mode (P.205), the set speed
will be increased or decreased
as follows:
Fine adjustment: By 1 mph (1.6
*1
km/h) or 1 km/h (0.6 mph)
time the switch is pressed
Large adjustment: The speed will
continue to change while the switch
COROLLA H/B_U
4-5. Using the driving support systems
is held.
*1
*2
Pressing the switch changes the
vehicle-to-vehicle distance as
follows:
*2
each
*1
or
*2
increments for
1
2
*2
each
3
The vehicle-to-vehicle distance is
*1 set automatically to long mode
or 5
when the engine switch is turned to
increments for as
ON.
If a vehicle is running ahead of you,
the preceding vehicle mark
also be displayed.
*2
each
Select a distance from the table
: When the set speed is shown in
"MPH"
: When the set speed is shown in
"km/h"
Changing the vehi-
cle-to-vehicle distance
(vehicle-to-vehicle dis-
tance control mode)
Long
Medium
Short
Vehicle-to-vehicle dis-
tance settings (vehi-
cle-to-vehicle distance
control mode)
203
4
will