Toyota Corolla Hatchback 2019 Owner's Manual page 51

can be removed, remove the
head restraint. (P.112)
3
Place the child restraint sys-
tem on the seat facing the
front of the vehicle.
4
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
5
Fully extend the shoulder belt
and allow it to retract to put it
COROLLA H/B_U
1-2. Child safety
in lock mode. In lock mode,
the belt cannot be extended.
6
While pushing the child
restraint system into the rear
seat, allow the shoulder belt
to retract until the child
restraint system is securely in
place.
After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
7
If the child restraint has a top
tether strap, follow the child
restraint manufacturer's
operation manual regarding
the installation, using the top
tether strap to latch onto the
top tether strap anchor.
(P.55)
8
After installing the child
restraint system, rock it back
51
1