Toyota Corolla Hatchback 2019 Owner's Manual page 516

516
9-1. Specifications
Tire related term
Maximum permissible inflation
pressure
Measuring rim
Open splice
Outer diameter
Overall width
Passenger car tire
Ply
Ply separation
Pneumatic tire
Radial ply tire
Reinforced tire
Section width
Sidewall
COROLLA H/B_U
Meaning
The maximum cold inflation pressure to
which a tire may be inflated
The rim on which a tire is fitted for physical
dimension requirements
Any parting at any junction of tread, side-
wall, or innerliner that extends to cord
material
The overall diameter of an inflated new tire
The linear distance between the exteriors
of the sidewalls of an inflated tire, including
elevations due to labeling, decorations, or
protective bands or ribs
A tire intended for use on passenger cars,
multipurpose passenger vehicles, and
trucks, that have a gross vehicle weight
rating (GVWR) of 10,000 lb. or less.
A layer of rubber-coated parallel cords
A parting of rubber compound between
adjacent plies
A mechanical device made of rubber,
chemicals, fabric and steel or other materi-
als, that, when mounted on an automotive
wheel, provides the traction and contains
the gas or fluid that sustains the load
A pneumatic tire in which the ply cords that
extend to the beads are laid at substan-
tially 90 degrees to the centerline of the
tread
A tire designed to operate at higher loads
and at higher inflation pressures than the
corresponding standard tire
The linear distance between the exteriors
of the sidewalls of an inflated tire, exclud-
ing elevations due to labeling, decoration,
or protective bands
That portion of a tire between the tread
and bead